Anionic polyacrylamide

This product is a water-soluble polymer. Insoluble in most organic solvents, it has good flocculation properties and can reduce the frictional resistance between liquids.

Product application scope and performance:

1. Can be used for the treatment of industrial wastewater and mining wastewater.

2. Can be used as an additive for mud materials used in oil fields and geological drilling.

Product quality indicators:

1. Appearance: The solid is a white or slightly yellow particle or powder, and the colloid is a colorless or slightly yellow colloidal substance.

2. Solid content (solid): ≥ 88%.

3. Ionicity: 0-100%.

4. Molecular weight: 15-20 million.

Usage and precautions:

1. The product should be prepared into a 0.1% concentration aqueous solution, preferably neutral water without salt.

2. When dissolving, evenly sprinkle this product into the stirred water and increase the temperature appropriately (<60 ℃) to accelerate dissolution.

3. Determine the * * * dosage of this product through a small trial.

4. Solid products are packaged in polypropylene woven bags, lined with polyethylene film bags, with a net weight of 25 kilograms per bag; Colloids are packaged in polyethylene plastic drums, or in iron drums lined with polyethylene film bags, with a net weight of 50 kilograms or 200 kilograms per drum.

5. This product has hygroscopicity and should be sealed and stored in a cool and dry place at a temperature below 35 ℃.

6. Solid products should be avoided from being scattered on the ground to prevent them from becoming slippery due to moisture absorption.

7. Product storage period: two years.