Cationic polyacrylamide

This product is a water-soluble polymer that is insoluble in most organic solvents and has good flocculation properties, which can reduce the frictional resistance between liquids.

Product application scope and performance:

1. Mainly used for sludge dewatering and reducing sludge moisture content.

2. Suitable for the treatment of drinking water, industrial wastewater, and domestic sewage.

3. Used in the papermaking industry, it can improve the dry and wet strength of paper and increase the retention rate of fine fibers and fillers.

Product quality indicators:

1. Appearance: The solid is a white or slightly yellow particle or powder, and the colloid is a colorless or slightly yellow colloidal substance

2. Solid content (solid): ≥ 88%

3. Ionicity: 0-100%

4. Molecular weight: 8-10 million

Usage and precautions:

1. The product should be prepared into a 0.1% concentration aqueous solution, preferably neutral water without salt.

2. When dissolving, evenly sprinkle this product into the stirred water and increase the temperature appropriately (<60 ℃) to accelerate dissolution.

3. Determine the * * * dosage of this product through a small trial.

4. Solid products are packaged in polypropylene woven bags, lined with polyethylene film bags, with a net weight of 25 kilograms; The adhesive is packaged in polyethylene plastic drums, lined with polyethylene film bags, with a net weight of 50 kilograms or 200 kilograms.

5. This product has hygroscopicity and should be sealed and stored in a cool and dry place at a temperature below 35 ℃.

6. Solid products should be avoided from being scattered on the ground to prevent them from becoming slippery due to moisture absorption.

7. Product storage period: two years.